kernel 2.6.19-1.2895.fc6でsensorsやると
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+19°C
Core1 Temp:
+24°Cit8716-isa-0290
Adapter: ISA adapter
VCore: +0.98 V (min = +0.00 V, max = +4.08 V)
VDDR: +3.26 V (min = +0.00 V, max = +4.08 V)
- 3.3V: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
- 5V: +4.76 V (min = +0.00 V, max = +6.85 V)
- 12V: +11.52 V (min = +0.00 V, max = +16.32 V)
in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
5VSB: +4.68 V (min = +0.00 V, max = +6.85 V)
VBat: +2.93 V
fan1: 225000 RPM (min = 0 RPM)
fan2: 855 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +23°C (low = -1°C, high = +127°C) sensor = diode
temp2: +27°C (low = -1°C, high = +127°C) sensor = thermistor
temp3: -11°C (low = -1°C, high = +127°C) sensor = thermistor
vid: +1.100 V
http://bbs.fedora.jp/read.php?FID=3&TID=19
sysfsが導入されたので「/proc/sys/dev/sensors/」でなく/sys/bus/i2c/
temp1がCPUの温度、temp2がMBのチップセットの温度、fan1がCPUファンの回転数（うまく計れてない）fan2が前面後面12cmファンの回転数
echo 100 > /sys/bus/i2c/drivers/it87-isa/9191-0290/pwm2 で前面後面の12cmファンが800rpm程度に
echo 80 > /sys/bus/i2c/drivers/it87-isa/9191-0290/pwm2 で前面後面の12cmファンが500rpm程度に
どうやらpwmconfigで制御できそうだ
